Aerojays Design
Drawn. Modeled.Printed.
Broken part? Fix it.
Snapped tab, stripped hinge, cracked bracket — send a photo with a quarter next to it and we'll model and print a replacement, usually stronger than the original. Most parts $40–$120.
Send a photo — free quoteGot an idea? Build it.
Bring a sketch, a sample, or a part to scan. We CAD it, print it, and iterate until it's right — then short runs when it is. Want it out in the world? We can license it and sell it for you.
Start a buildWe make the parts you can't buy anymore — and the products that don't exist yet. One shop in Bakersfield, from first drawing to finished print: pickup and delivery across Kern County, mail-in service from anywhere in the US.
Services
/ Table 1 — what we do| Item | Service | Material / Output | Typical |
|---|---|---|---|
| 01 | Replacement part fabrication | PLA · PETG · ASA · ABS | $40–$120 |
| 02 | Parametric CAD modeling | STEP · STL · F3D — you own the file | $45+ |
| 03 | Reverse engineering | Measured, redrawn, print-ready | Quoted |
| 04 | Prototyping & short runs | 0.2mm layers · 1–100 units | 3–5 days |
| 05 | Jigs, fixtures & brackets | Shop-grade, built to your part | Quoted |
| 06 | Shop drawing & spec sheet | Your STEP / STL in · dimensioned PDF out | $49 / part · 2 days |
- Replacement Part Fabrication
- Obsolete Part Replacement
- Custom CAD Modeling
- Reverse Engineering
- 3D Printing
- Rapid Prototyping
- Custom Brackets and Mounts
- Jigs and Fixtures
- Short-Run Production
- Product Design
- Shop Drawings & Spec Sheets
Broken part?
/ Mail it in or drop it offIf a plastic part failed and the manufacturer won't sell it separately, that's the job we do most.
Appliance handles and knobs, bracket and clip failures, obsolete parts nobody stocks anymore, custom mounts, and hard-to-find hardware. We model a replacement from scratch in CAD and print it in durable plastic — usually with more material wherever it failed the first time.
Local to Bakersfield? Drop the original off or we'll arrange pickup. Anywhere else in the country, mail the part in and we'll ship the replacement back.
Most people don't know this is an option instead of replacing the whole appliance. Usually it is.
Shop drawing & spec sheet
/ Detail A — your part, on paperSend a STEP. Get back a print a machinist can work from.
You have the model. What you don't have is the drawing — the sheet with every hole called out, the overall dimensions, the scale, the material and mass, the spec table a shop quotes from. That takes a CAD seat and an afternoon. We turn it around for $49 a part.
Works with anything that exports STEP: SolidWorks, Fusion 360, Onshape, Inventor, FreeCAD, Rhino. STL, OBJ and 3MF files draw too.
- Sheet 1 — the drawing. Plan, front, right and isometric views in third angle at a true standard scale. Overall dimensions on every view. Every hole, counterbore, countersink and slot called out the ASME way — 4X ⌀6 THRU, ⌀8 ↧4 ⌴⌀12 ↧2 — with positions from a datum. Edge rounds noted.
- Sheet 2 — the spec. Material and density, mass, size, volume, surface area, a hole schedule with X-Y-Z coordinates, print notes, best print orientation, and a bill of materials line.
- Numbered and revision-tracked. Every sheet carries a drawing number that stays with the part for life. Change the part later and the reissue comes back as Rev B, same number.
- Delivered as PDF and PNG, letter size, ready to print, email, or drop in a quote package.
| Item | What | Price |
|---|---|---|
| 01 | Drawing + spec sheet, per part | $49 |
| 02 | Five or more parts in one order | 20% off |
| 03 | 24-hour rush | +$25 |
| 04 | One round of revisions | Included |
| 05 | Print-ready file check (STL / 3MF, watertight, overhangs) | +$20 |
You pay after you see the proof. Send the file, get a proof within two business days, approve it, then pay by card, Apple Pay or Google Pay. Nothing up front.
Real output, not a mock-up: the bracket above is a demo part drawn by our own AeroCAD, straight from its geometry.
How it works
/ Idea → model → partSend a photo
Use the quote form below. A photo of the part with a quarter next to it for scale is ideal — a sketch or a full spec works too. The quote is free, with no obligation.
We model it
You get a 3D model and drawing to review before anything prints. Revisions happen here, where they're cheap.
We print it
Printed in the right material for the job, checked for fit and finish, and delivered. Most single parts are 3–5 days from an approved quote.
Recent work
/ Model + print
About
/ The storyAerojays Design started the way a lot of good things do — as a hobby that got out of hand.
What began as tinkering with a 3D printer turned into something bigger: fixing the part nobody sells, customizing the thing that's almost-but-not-quite right, and turning rough ideas into something you can actually hold.
Somewhere along the way, the hobby became the whole point. Every model is drawn and every part is printed by me, one at a time, right here in Bakersfield — no warehouse, no overseas factory. Just someone who'd rather solve the problem than tell you it can't be done.
If you've got something broken, something missing, or something that only exists in your head — that's exactly the kind of thing I like to make.
And if you just want something silly — a goofy gadget, a weird little gift, a random odd-and-end that made you laugh — I'll happily print that too.
Products
/ Table 2 — the AeroCleat lineOne rail on the wall. Every tool has a home.
AeroCleat is a French-cleat wall system printed in PETG: mount a rail once, then hang hooks, bins and holders on it — no new holes, ever. Every module shares the same bevel, so anything you add later fits anything you already have. Designed and printed here in Bakersfield, shipped anywhere in the US.
Printed when you order it, priced by the module
Pick the rail length and the modules you want and ask for a quote — you'll have a number the same day. Every part ships with its own drawing sheet, so you know exactly what you're mounting. Etsy listings are on the way; ordering direct is open now.
Common questions
/ Before you askCan you make a replacement part if the manufacturer doesn't sell it?
How much does a custom part cost?
What's the turnaround?
Do you work with businesses?
Do you deliver, and do you ship?
Get a quote
/ Fastest way to startTell us what you're trying to make or fix. A photo helps a lot — the broken part, a sketch, anything. Put a quarter next to it for scale and we can price it much faster.
Your message lands straight in our inbox. Most quotes go out within a day, and there's no charge for the quote. Most parts land in the $40–$120 range — you'll know your exact number before anything prints.
Bakersfield and Kern County for pickup and delivery. Mail-in service anywhere in the US.
ej@aerojaysdesign.com works too.
Bakersfield · Shafter · Delano · Taft · Tehachapi · Wasco · Arvin · Lamont · Buttonwillow · McFarland · Ridgecrest · and the rest of Kern County. Local pickup and delivery. Mail-in replacement-part service available nationwide.